Non-destructive control

At different stages of production, non-destructive methods of testing are used ensuring high quality of the produced items.

Fixed X-ray installation РАП150/300

This is used for welding, soldering and casting, as well as for X-ray examination of the unity of thin-walled metal objects.

Portable X-ray installation БАЛТО

This is used for welding, soldering and casting, as well as for X-ray examination of the unity of the assembled objects in laboratory, shop and field conditions.

Universal gamma-ray flaw detector УГД-3М

This is used for welding, soldering and casting and other technological processes, as well as for radiation and flaw detection of parts and aggregates to define their technical state by using various sources of radiation.

Digital densitometer ДП-30

This is used for define optical density of radiographic pictures during their deciphering at the laboratory.

Universal magnaflux flaw detector МДС-5

This is used to control ferromagnetic parts of different shapes and sizes with the aim to check them for superficial and subsurface micro-cracks, spills (hair lines) and other defects. The flaw detector allows carrying out the whole cycle of magnetic control of the parts, including their post-control demagnetization.

Portable magnetic flaw-detector ПМД-70

This is used for non-destructive magnaflux control of ferromagnetic parts with the aim to identify superficial and

subsurface micro-cracks, spills (hair lines) and other invisible defects in laboratory, shop or field conditions.

Portable magnetic device ПМВ-2

The device with a flexible magnetic conductor is used for magnaflux control of welded seams to check them for cracks, unwelded joints, etc. in shops and in the field.

Capillary control

Capillary (luminescent, color-matched, luminescent-color-matched, contrast) control is used to identify

superficial micro-cracks of 1 micrometer and over.

Ultrasonic flaw detector-tomograph УД - 4Т

This is used for non-destructive control of materials, items and welded joints to identify any rupture of unity and defect coordinate and to send the control results to the computer database bank aiming at receiving the final document.

Ultrasonic thickness gauge УТ-31

This is used to measure an item thickness in case of one-side accessibility and to send the control results to the computer database bank.

Flaw-detector ВД-33Н

This is used to identify superficial and subsurface micro-cracks in the materials with electrical conductivity within the range of 0,5…50 mS/m at laboratories, at the shop and in field.

Acoustic impedance flaw detector ИД-91М

This is used to identify the ruptures of unity or delamination of multi-layer adhesive joints of the items made of composite materials.

Acoustic impedance flaw detector ДАМИ-С НАО1

This is used for acoustic control of metal and non-metal structures with multi-layer adhesive and soldered, as well as cellular fillers, to identify the defects of delamination or unadhesiveness and to send the control results to the computer database bank aiming at receiving the final document.

Fluxgate pole scanner МФ-22М

This is used to identify the residual magnetization in relative values after demagnetizing of a unit.